Included as part of the User Support resources available to help you learn the application is the option to run it in "Training/Demonstration Mode". After you have initially installed the software, you can select this mode at any time to operate in this demonstration environment for your learning and training purposes.

The output is fictitious in terms of the displayed demo report contents, and runs separately from your normal, fully-functional mode of the PreViser™ application, so you won’t have to worry about “breaking” anything or adding unwanted reports to your actual patients' records. You may add or edit Patient records, and go through the motions of entering data for a risk assessment, but you do not create new risk assessments.

There is no charge to download or use the PreViser™ software in Demo mode. You do not need an Internet connection to run the program in Demo mode, as the data is not sent out for risk calculation; running the program in Demo mode takes it offline. You are therefore not charged for the simulated risk assessments performed while in Training mode.

To select or deselect the Training/Demonstration mode:

1. To activate Demo mode, click the Options button (at the top of each screen) to display your Options page.

2. In the bottom left hand corner of the screen, click the box marked "Training/Demonstration Mode" so it is selected (checked). Click the Save button.

3. The application is now running in Demo mode. It will remain in Demo mode (even if you close and re-open the application) until you change that setting.

4. To change the application and deactivate Demo mode, open the Options page and uncheck the Training/Demo mode box. Click the Save button. The application is now in normal, fully functioning mode.

For more information:

• To read an overview of the Demonstration mode and for suggestions on how to use it as a supplemental learning resource, see the Demo Mode topic in the Getting Started section.
• To learn how to set and use the application in Training/Demonstration mode, see the Options and Settings and Demonstration Mode documentation.